CNC/CAD/CAM News

5 Tips to safeguard your CNC machines on lock down time

in CNC/CAD/CAM News, General

5 tips tp safe guard cnc machine

Tip 1- Clean your machine

Clean your machine, make sure there is no any chip or coolant inside as well as on the chip tray of the machine.

Move all axis to its center position,

Tip 2- Center positioning of axis

Move all axis to its center position, before switching off.

tool removing

Tip 3-Clean the spindle tapper

Remove Tools from the spindle, and clean the spindle tapper, and apply grease in the taper to avoid rust.

electrical panel

Tip 4-Check Electrical panel doors

Make sure all electrical panel door or cabinet doors are closed, to safe guard from rats and other pests. ( if possible keep some rat cake or tobacco leaf to avoid entry of rats and other pests)

apply of coolant in machine bed

Tip 5- Apply coolant oil

Apply a concentrated coolant oil on the table, telescopic cover using a paint brush, to avoid rusting on lock down time.

OUR PRODUCTS & SERVICES

ESPRIT CAM LOGO          
ZW 3D        CIMCO logo

FOR CONTACT +91 9840999411

TO EXPLORE MORE VISIT US ON www.millwright.in

Haas Demo Day in Chennai!

in CNC/CAD/CAM News

Inviting every one

HAAS & ESPRIT CAM by DP Technology cordially invites everyone for “HAAS Demo Day” happens on 12th,13th,14th of August 2019 at its Tech Center @  #17 (Old No.4) SIDCO Industrial Estate, Ambattur, Chennai – 600098.

“HAAS Factory Outlet”, a division of Manav Marketing Pvt Ltd, Organizing a show named “HAAS Demo Day”.  On this day, this team exhibits a series of HAAS Machines which are dedicate made for India (i-series machines)

On the Show

On this show, they cover major requirements of Metal Cutting Industry by exhibiting, product machining using “VF2”, Die mold Applications using “ VF5”, Complex Millturn parts using “ ST20Y”.  Apart from this “DT1” Drill Tap Center also kept for the show.

Esprit by DP Technology

All these parts are programmed using a full spectrum CAM Software “ESPRIT CAM” .

Who and why should attend the show ?

The peoples at the top level managements like Machine shop proprietors, General Managers, Board of Directors similarly Mid level management peoples like Shop floor supervisor,production managers, CNC programmers can attend this show which would very helpful to explore your knowledge in developing the industries such as Automobile ,Oil& gas ,Aerospace, Marine, Die & Molds etc.,

These are the following facts for why should attend the show:-

  • Now in the present manufacturing field CNC plays a vital role in company growth hence many companies from MNC to small and medium scale industries have required CNC for their daily source of income and more over CNC machines have over come the conventional machines so there comes shortage of skilled operators, setters ,programmers in order to over come such obstacles you can get proper solution.
  • Getting order from an new customer is not an easy task in this present competitive world by proving the job without any rejection and with best cycle time so we provide solutions to Quote you customer instantly with effective cycle time for the new development.
  • “Time and tide wait for non” this is a proverb like wise time is very precious for everyone in machine shop workers hence we give solution for save time in machine shop.

Other Partners.

Apart from Esprit by DP Technology, other brands like, CHMER wire EDM, Atandra Krykard Power management solution, Sidbi for Banking, Mitsubishi Hardmetal India Pvt.Ltd for tooling, GTK tooling, also exhibits their products and services.

Venue

No.17(NP) (Old No.4) SIDCO Industrial Estate, Ambattur, Chennai – 600098.

Contact for more information

Chennai         99401 64223 / 95000 64224

Bangalore     99454 88611 / 97413 11880

Hosur             9952233553

Coimbatore  99522 33554 / 9952434552

Dharwad      91086 97909 Hyderabad   92463 79285

Millwright invites every one to intec 2019 @ Coimbatore

in CNC/CAD/CAM News

About Intec

Intec conducted by CODISSIA – an ISO 9001:2000 organization, INTEC is an ITPO (India Trade Promotion Organization) approved trade fair, with due support from the Central & State Governments. The fair supports SSI units with special concessions for stall rental charges at the discretion of SIDBI & NSIC. With wide global participation, it is an ideal platform to launch new products, invite enquiries and generate potential leads across the globe.

  • 17 successful editions
  • Over 1 lakh business visitors in each edition
  • More than 625 exhibitors and over 200 product categories
  • Trade turnover in excess of Rs.3000 Million
  • Live demonstration of machinery
  • 3500 KW of electric power back-up
  • Seminars & Conferences

Participation of EspritCAM by DPtechnology


DP TECHNOLOGY is a leading developer and supplier of computer-aided manufacturing (CAM) software for a full range of machine tool applications. ESPRIT, DP Technology’s flagship product, is a powerful, high-performance, full-spectrum programming system for milling, turning, wire EDM, and multi-tasking machine tools.

They were participating on this show, and we, millwright organised them to participate,show all the required CAD CAM tools to increase the productivity for organizations

for more details please visit www.millwright.in/espritcam

Haas Automation Partners with Machining Cloud

in CNC/CAD/CAM News

October 9, 2018 – Haas Automation and MachiningCloud jointly announce that they have partnered to offer Haas CNC machine tool product data, including a comprehensive collection of 3D CAD models for the complete line of Haas CNC machines, on the MachiningCloud platform.
The Haas MachiningCloud partnership will utilize the convenience and reach of MachiningCloud’s technology and enable customers to easily gather the product data they need to drive their CAM, Simulation and other data-hungry shop software. MachiningCloud simplifies the way customers gather the 3D CAD Models for their Haas CNC machines, workholding and cutting tools by providing them in one place and in the formats needed for today’s shop software. Included with the product data of more than 750,000 cutting tools, beyond the 3D CAD models, MachiningCloud also provides the descriptive information needed for part programming, and the usage information, including speeds and feeds, needed to run the selected cutting tools on the customer’s Haas machines.

While Haas Automation designs and manufactures CNC machine tools for the metalworking industry, MachiningCloud is a product data provider for world-leading cutting tool, CNC machine tool, workholding, and metrology manufacturers.

“By publishing their product data on MachiningCloud, Haas Automation is showing an industry-leading commitment to supporting their customers’ need for easy access to the information needed to drive their shop software. By having the product data for their machines, cutting tools and workholding available in one place, customers can quickly and easily find what they need to program their jobs and keep the chips flying”, says Christophe Rogazy, Director of Product Management for MachiningCloud.

“Haas Automation offers 3D CAD models for their complete line of CNC machines, allowing our customers to easily program and simulate their manufacturing processes offline in their shop software. By providing the models on MachiningCloud, we are providing our customers a convenient, single-source for the machine and cutting tool product data they need to run their shop”, says Scott Gasich, VP of Sales and Marketing at Haas Automation.

Customer feedback from Q2Q Solutions for Espritcam

in CAM Softwares, CNC/CAD/CAM News, Feedbacks

Hello,

One of our esteemed customer Q2Q Solutions Private Limited, Using Espritcam on their shop floor, for various types of Multiaxis and Multitasking machines.

Here Mr Jegannath Malaiswamy, Leading Engineering Dept, explaining the advantages and usefulness of Espritcam and support from DP technology and Millwright.

List of Machines in their Shopfloor running with Espricam.

  • DMU 80 P DUOBLOCK
  • DMU 60 eVo Linear
  • DMC 1150 V
  • DMU 125 FD
  • NTX 1000
  • NH 5000 DCG

CGTech enhances The VERICUT’s MachiningCloud Connection

in CAM Softwares, CNC Programming, CNC/CAD/CAM News

vericut

VERICUT is a verification and simulation software used to detect CNC programming errors as well as collision checkings and areas of inefficiency. MachiningCloud is an independent provider of CNC cutting tool and workholding product data.

In the latest of VERICUT 7.4, after defining a tooling package on the MachiningCloud, users can directly download all the tool assemblies within the package and use it within VERICUT with significantly fewer steps compared to manually configuring a tool for use in a simulation session.

The process is very simple:
1) First Build a MachiningCloud job containing all your tool assemblies;
2) Next export the job downloading it to your local computer;
3) from within VERICUT click once to import all the tools from the job;
4) And simulate using your tool assemblies what is being created in the MachiningCloud.

Christophe Rogazy, Cloud Evangelist for MachiningCloud further says that “This upgrade eliminates manual steps saving time and further increasing efficiency in the simulation process for VERICUT customers using the MachiningCloud”.

Courtesy: CGTECH VERICUT

Delcam’s new PowerMILL CAM can mirror complete machining projects

in CAM Softwares, CNC/CAD/CAM News

 

powermill-mirroring_f8vg1e

Recently Delcam has launched the 2016 version of its PowerMILL programming software specially for five-axis and high-speed machining.

The new release is further enhanced with the ability to mirror complete machining projects in one operation and to maintain automatically the machining strategies & parameters. Previously, only individual toolpaths could be mirrored. & after this enhancement a project itself can be mirrored as per the machining requirements

This new feature of automatic mirroring saves considerable time whenever right- and left-hand versions are needed of a part or tool. It will be very useful for machining symmetrical objects & also faster to execute the machining process as it will be possible to program one half and then mirror the toolpaths to complete the program.

To ensure that the mirroring has performed as expected, the new option can be used with the ability, introduced in PowerMILL 2015 R2, to undertake complete verification of a project for machine-tool issues such as collisions. Comprehensive verification can be performed, including ensuring that the machine tool is capable of running the mirrored toolpaths, as well as checking for both machine-tool collisions and tooling collisions.

Courtesy:-Manufacturing Tech Update

Now @ Coimbatore-Millwright

in CNC/CAD/CAM News

 

now@300Yes ! Millwright is now at Coimbatore!

Dear Friends and Well wishers,

We are glad to inform that, Millwright (A CAD/CAM/CNC Machining consulting company) extends it’s operations to Coimbatore.

We thank for the extensive support provided by all our clients,Principal companies, friends, etc. which supported us for our growth in a great way, and request to continue the same for our future growth too.

 

To know more about our services, kindly  click on the following links.

http://millwright.in/services.html

http://millwright.in/training.html

Our new location

G.E.S Complex, 401, 7th Street, Gandhipuram, Coimbatore- 641012

http://millwright.in/contact.html